Damper Position meter ILH-PM-220
This product is used for time-sharing angle control of AC 110V-220V actuators (0-90 degrees divided into 5 parts).
Retail Price：
$ 16.5
Remaining Stock
10000
Category：
Products
Category：
Damper Actuator Series
Service Hotline：+86-10-8775-5626
Inquiry Email：jocko@ilamps-trade.com
- Product description
- Technical data
- Measurement
-
- Commodity name: Damper Position meter ILH-PM-220
This product is used for time-sharing angle control of AC 110V-220V actuators (0-90 degrees divided into 5 parts).
Product Specifications
① Imported chips, advanced technology, reasonable design, beautiful appearance, surge
protection and lightning protection, safety and reliability.
② The design of long-distance radio signal transmission without obstacles, simple and
convenient remote control.
③ This remote control receiver is intelligent learning type, you can customize one or more remote control handles according to your needs. -
Technical parameters
● Nominal Voltage:AC110V-AC220V
● Operating Frequency: 315 MHz
● Output voltage: AC110V or AC220V 3A
● Remote Control Distance: 100 meters (open space)Code Matching and Code Cleaning
① Remote Control Matching: With the motor stopped, press and hold the learning button (stop button ) on the controller for 3 seconds. After the indicator light goes out, immediately press any button on the remote control. The indicator light will flash three times and then stay on, indicating successful learning (this method can be repeated).② Clearing the controller code: With the motor stopped, press and hold the learning button (stop button) on the controller for 3 seconds. After the indicator light goes out, continue pressing and holding the learning button (stop button) for approximately 8 seconds. The indicator light will flash three times and then remain on. Once the code clearing is successful, all remote controls will be invalidated. If you need to specify a remote control, you need to perform the learning process.Time setting and initial reset① Time setting: When the motor is stopped, press the setting button, and the LED will display the time stored in the controller. The user can adjust the time according to usage requirements (the time duration ranges from 2 seconds to 999 seconds). After setting the desired time, press the stop button to save and exit.② Resetting to zero for the first time: After setting the time, press the remote control to reset to zero. If it does not reset to zero, press the remote control several times to reset to zero. After confirming that the air valve has reset to zero, it can be used normally. -
Related Documents
-
File size: 2.0MB
